Amanngirrbach ceramill zolid preshade Instructions D'utilisation page 24

P R O P E R T I E S
These blanks are not stained with the Ceramill Liquids, but monolithi-
cally stained upon successful final sintering with Ceramill Stain&Glaze
E N
or used as frame for veneering. The following Table lists the recom-
mendations for achieving the respective tooth shade.
Blank Shade
Ceramill Zolid Preshades 1
Ceramill Zolid Preshades 2
Ceramill Zolid Preshades 3
Ceramill Zolid Preshades 0
 ideal for this shade
O shade can be achieved
After completion of the specified final sintering, the material meets
the requirements of DIN EN ISO 6872; with appropriate further
processing (see page 28ff.), it also meets the requirements of
ISO 13356.
Safety data sheet/Declaration of conformity
The data sheet on safety and the declaration of conformity are avail-
able on request under
24
A1 A2 A3
O O
 
– 
– not suitable for this shade
www.amanngirrbach.com
Tooth shade
A3,5 B1
– –

O – –
 O –
Bleach
.
B2 B3
–

– –
– O