Cleaning The Electrical Floor Brush - Rotel U6082CH Mode D'emploi

Cleaning the electrical floor brush

o If hair is found in the floor brush, loosen the roll brush release screw as shown below
to open the roll brush cover, and then remove the roll brush.
o Swipe along the roll brush to remove foreign objects.
o Then, reinstall the roll brush again and tighten the roll brush release screw.
o NOTE: It is advisable to empty the dust container after every use. If the filter pad is
blocked by dust accumulation, please clean or replace it in time. The roll brush may
become wrapped in hair or other fibres after long-term use, so please clean it in time
to make the appliance work efficiently.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
37