Using For The First Time - Trixie TR1250 Mode D'emploi

• To disconnect turn control to "OFF" („0")then remove plug from outlet.
• Before using as well as after each use the blades has to be oiled. Blades may become hot
during use. Check often to prevent burning animal.
• Keep the appliance dry.
Save these instructions!

Using for the first time

Before starting the clipper, remove the blade guard. Plug the cord into an electrical outlet,
operate at 230-240 volt, 50 cycle AC electrical current or as noted on the unit. To start the
clipper move the switch button to the "ON" („I") position. To stop, move the switch button
back to the original position. After using your clipper TR1250, rewrap the cord and store in a
safe place.
Using the attachment combs
Some models do not have combs and sizes will vary by kit. You can set the blades for a
longer cut by using any of the attachment combs made for your clipper TR1250. The combs
mount easily; simply slip the cutter blade teeth into comb and snap the comb down. To
remove, simply snap off (Figures A & B). These attachment combs guide hair into the blades
and give you precise control of hair lengths. The length of trim is indicated on the attach-
ment comb. Use the chart to find the approximate lengths of cut. Different blade angles in
relation to the skin, thickness and texture of the hair will vary the cutting length.
10