Télécharger Imprimer la page

Bose SOUNDLINK MAX Mode D'emploi page 40

Masquer les pouces Voir aussi pour SOUNDLINK MAX:

Publicité

UPDATE THE SPEAKER
The speaker begins updating automatically when connected to the Bose app and an
update is available. Follow the app instructions. When the update begins, the Power
light blinks white 3 times (repeated) until the update is complete.
You can also update the speaker using the Bose updater website. On your computer,
visit: btu.Bose.com
btu.Bose.com and follow the on-screen instructions. When the update begins,
the Power light quickly blinks white for 10 seconds.
CLEAN THE SPEAKER
The speaker may require periodic cleaning.
• Clean the surface of the speaker with a soft, damp cloth (water only). Make sure
the USB-C port is fully dried out before charging. If moisture is detected, the Power
light slowly blinks white and amber (see page 27).
• Do not use any solvents, chemicals, or cleaning solutions containing alcohol,
ammonia, or abrasives.
• If the speaker is exposed to salt or chlorinated water, gently rinse with fresh water
following the exposure to remove residue.
STORE THE SPEAKER
When not in use, store the speaker in a cool place.
CAUTION: Do NOT store the speaker for extended periods when the battery is fully
charged or has a low charge (see page 27).
REPLACEMENT PARTS AND ACCESSORIES
Replacement parts and accessories can be ordered through Bose customer service.
Visit: support.Bose.com/sl-max
support.Bose.com/sl-max
LIMITED WARRANTY
The speaker is covered by a limited warranty. Visit our website at
worldwide.Bose.com/Warranty
worldwide.Bose.com/Warranty for details of the limited warranty.
To register your product, visit worldwide.Bose.com/ProductRegistration
instructions. Failure to register will not affect your limited warranty rights.
CA RE AND M A I NTE N A NC E
worldwide.Bose.com/ProductRegistration for
|
4 0
E N G

Publicité

loading