Publicité
66. Flow rate of the MultiFlow Dispense Pump in the Robot
67. Remove the 500 ml bottle filled with NaCl (0.9%) from
68. Replace the sample protection shield.
71. The robotic arm moves to the left if you click
72. Test Result
74. The Maintenance Protocol has detected failures.
75. Please contact QIAGEN Service Personnel.
84. The Informationfile of the sample tubes is not available
85. The Default values for the inner diameter of the sample
87. Press <Stop Protocol> to stop.
BioRobot MDx DSP Manuel d'utilisation 10/2004
Configuration
Reagent RotorSlot 2.
<Continue>!
tubes will be used.
Index
Index-3
Publicité
