LIVARNO home 459479 2401 Instructions De Montage Et Consignes De Sécurité page 5

GB/ IE
WASHING MACHINE SHELVING
UNIT
Assembly and safety advice
1. Introduction ..........................................................5
2. Safety ...................................................................5
3. Scope of delivery (Fig. A) ..................................5
4. Technical specifications ......................................6
5. Safety information ...............................................6
6. Structure ...............................................................6
7. Fixing the product to the wall .............................6
8. Cleaning and care instructions...........................7
9. Disposal ................................................................7
10. Warranty ..............................................................7
11. Distributor .............................................................8
12. Service address ...................................................8
1. Introduction
Congratulations!
With your purchase you have opted for a high-qual-
ity product. Familiarise yourself with the product
before using it for the first time. Please read the fol-
lowing assembly and safety advice carefully. They
contain important information for safety, use and
disposal. Familiarise yourself with all of the assembly
and safety advice before using the product. Only use
the product as described and for the specific areas
of application. Keep these assembly and safety ad-
vice in a safe place. Provide all of the documentation
when passing the product on to third parties.
In the following, the Washing machine shelving unit
is referred to as the product.
Explanation of symbols
The following symbols and signal words are used in
these assembly and safety advice, on the product or
on the packaging.
WARNING!
1
This signal symbol/word indicates a hazard with a
high level of risk which, if not avoided, may result in
death or serious injury.
CAUTION!
2
This signal symbol/word indicates a hazard with a
low level of risk which, if not avoided, may result in
minor or moderate injury.
NOTE!
This signal word warns of possible property damage
or provides you with useful additional information
regarding the use.
This symbol indicates additional in-
formation.
This symbol indicates an identification
459479
number for products.
This symbol indicates that the product has
feet that are gentle to the floor.
This symbol indicates that assembly material
and instructions are included.
This symbol indicates the maximum load
weight.
These symbols inform you about
the disposal of the packaging
and the product.
04
LDPE
2. Safety
Intended use
The product is not intended for commercial use. Dif-
ferent use or a modification to the product are not
deemed as intended use and may lead to risks, such
as injuries and damage. The distributor assumes no
liability for damage that results from improper use.
The product is exclusively suitable for interior
use.
3. Scope of delivery (Fig. A)
2 x Head rod A
2 x Head rod B
4 x Middle bar C
2 x Foot bar D
2 x Foot bar E
1 x Cross brace F
3 x Shelves G
4 x Side strut H
22 x Allen screw I
2 x Cross screw J
2 x Wall plugs K
1 x Allen key L
1 x Assembly and safety advice (without fig.)
GB/IE
5