Publicité
Tips for saving energy
The following information will help you to use
your appliance in an ecological way, and to save
energy:
Use dark coloured or enamel coated
cookware in the oven since the heat
transmission will be better.
While cooking your dishes, perform a
preheating operation if it is advised in the
user manual or cooking instructions.
Do not open the door of the oven frequently
during cooking.
Try to cook more than one dish in the oven
at the same time whenever possible. You
can cook by placing two cooking vessels
onto the wire shelf.
Cook more than one dish one after another.
The oven will already be hot.
You can save energy by switching off your
oven a few minutes before the end of the
cooking time. Do not open the oven door.
Defrost frozen dishes before cooking them.
Use pots/pans with cover for cooking. If
there is no cover, energy consumption may
increase 4 times.
Select the burner which is suitable for the
bottom size of the pot to be used. Always
select the correct pot size for your dishes.
Larger pots require more energy.
Pay attention to use flat bottom pots when
cooking with electric hobs.
Pots with thick bottom will provide a better
heat conduction. You can obtain energy
savings up to 1/3.
Vessels and pots must be compatible with
the cooking zones. Bottom of the vessels or
pots must not be smaller than the hotplate.
Keep the cooking zones and bottom of the
pots clean. Dirt will decrease the heat
conduction between the cooking zone and
bottom of the pot.
For long cookings, turn off the cooking zone
5 or 10 minutes before the end of cooking
time. You can obtain energy savings up to
20% by using the residual heat.
Initial use
Time setting
Before you can use the oven, the time must
abe set. If the time is not set, oven will not
operate.
„
While making any adjustment, related
symbols on the clock will flash.
Press ,—" or „+" (5/6) keys to set the time after
the oven in energized for the first time.
D
l | 7 Sa
eee
aa
Program key
Cooking time
End of cooking time
Alarm symbol
Minus key
Plus key
Screen brightness setting
Alarm volume
Current time
10
Keylock
11
Adjustment key
After setting the time, you can start and end the
cooking by selecting the desired position with
temperature button and function button.
,
gt the current time is not set, time setting
will start increasing/moving up from 12:00.
Clock symbol '9' will be displayed to
CON
O O BWP
حل
CO
indicate that the current time has not been
set. This symbol will disappear once the
time is set.
15/EN
Publicité
