Publicité
92. Touch-activated police sirens
Turn on the switch 15. Touch the touch plate
12
to activate the sirens.
93. Touch-activated machine-gun fire
Connect terminals A-C, and then touch the touch
plate 12
to activate the machinegun sound
effects.
94. Touch-activated fire truck sirens
Connect terminals A-B, and then touch the touch plate to activate the fire truck sirens.
95. Touch-activated ambulance sirens
Connect terminals B-D, and then touch the touch plate to activate the ambulance sirens.
In this diagram, different siren sounds, recorded in the
memory of module 22, will be mixed with the star wars
sounds, recorded in module 23.
96. Touch-activated slot machine
Connect terminals B-C, and then touch the touch plate to activate the slot machine sound effects.
97. Light-activated police sirens
98. Light-activated machine-gun fire
99. Light-activated fire truck sirens
100. Light-activated ambulance sirens
101. Light activated slot machine
97-101. Connect the phototransistor
132
to terminals E-F, and then follow the instructions for
92-96 (cover the phototransistor to activate the sound effects).
98
102. Rain-activated flashing LED
Turn on the switch 15. When the LED
17
turns off, it will turn on again for a while when rain-
drops hit the touch plate. You can simulate the rain yourself.
103. Rain-activated flashing lamp
17
with the light-bulb 18. Raindrops will activate the lamp.
Replace the LED
104. Light-activated flashing LED
Replace the touch plate
12
with the phototransistor
132
. Shield the phototransistor from
light. When the LED turns off, stop shielding the phototransistor and you'll see how it activates
the LED 17.
105. Light-activated flashing lamp
Replace the LED
17
with the light-bulb 18. Now you can use light to activate the lamp.
99
Publicité
