Publicité
Use the correct cooling element for the type of transport box you have purchased. Only MT-ET
l
transport boxes are intended to be used with PCM packs.
Load the cooling elements and blood bags in accordance with the specific packing instruction
l
of the box.
Before using the straps of the transport boxes, make sure that they are adequately fastened.
l
Loosening of the straps can cause the transport boxes to fall, leading to damaging of the box
l
and / or the stored product.
Before using the transport box, it should be cleaned inside and outside.
l
For cleaning, use only gentle cleaning agents. Never use aggressive or caustic cleaning agents,
l
scouring powder, steel wool, abrasive sponges or chemical solvents.
Before cleaning, make sure the load stored has been transferred to a permanent storage
l
device.
If there is damage or any type of issue to your device, call the B Medical System service team
l
for further information.
When transporting or moving the device, be aware of its weight.
l
Check whether the unit has been delivered with all necessary interior accessories. Refer to the
l
specific transport box in Chapter 6: Technical Data.
The use of hrydrogen peroxide (H
l
suitable.
2.2 Labels and Symbols on the Packaging
Follow the instructions for transport and storage of the product marked on the packaging.
l
This side up
Handle with care
Store in a dry place
991.1543.01
Order Nr.
0000000
Product type / Model
Blood Transport Box
MT25-ET+4
BLUE
2. Important Information
O
) for the disinfection (sterilization) of the appliance is not
2
2
ORDERNR LINE
95%
+70°C
5%
-30°C
(01)05450104432125
(11)220101
(21)0000000
(240)991.1543.01
(22)MT25-ET+4
(10)ORDERNR-LINE
Qty
1
YYYY-MM-DD
9
Publicité
