Publicité
3. Installation Procedure
WARNING
Preparation of the cooling elements should be done by authorized personnel.
l
Ensure that the transport boxes are adequately loaded with the correct amount of preconditioned cooling
l
elements and maximum allowed storage load.
The devices must only be used by adults. Do not allow children to play with it or touch the controls.
l
Do not store flammable or explosive substances inside these appliances(e.g. aerosols with flammable
l
propellant). These may cause explosion or fire.
Make sure that no sharp or pointed objects come into contact with the cooling elements.
l
Do not insert metal objects such as a pin or a wire into any vent, gap or any outlet.
l
Avoid long lid openings to prevent that the inner temperature rises to high.
l
Make sure that the lid closes correctly and that the lid gasket seals correctly against the container.
l
Prior to using a transport box for the first time, the user should carry out his own tests and define a
l
validation process under relevant conditions with the available equipment. We recommend employing worst
case scenario testing conditions. The cooling elements provide a highly stable and well-designed system
component, which, however, must be adapted to the specific requirements of the user.
For the assessment and documentation of the product temperature over the transport period, the use of a
l
temperature logging device is highly recommended. B Medical Systems will not be liable for products stored
out of specification, which are further processed or administered after the transport.
CAUTION
Use the correct cooling element for the type of transport box you have purchased.Only MT-ET transport
l
boxes are intended to be used with PCM packs.
Load the cooling elements and blood bags in accordance with the specific packing instruction of the box.
l
12
3. Installation Procedure
Publicité
