Publicité
SET-UP
Do not operate this equipment until you have
read the CONTROLS and OPERATION
sections of this manual thoroughly.
To prevent injury, use an adequate lifting
device (i.e., hoist, or fork lift) to remove unit
from pallet.
1. Remove and discard banding attaching the
Mataway Overseeder to the pallet, and remove
unit from pallet.
Banding is under tension and may snap back
when cut. Wear eye protection and stay clear
when cutting the band.
GB-4
2. Check the oil level in the transmission. Level
should be up to the plug opening in the side of
the case. Add EP 80-90 gear lube if required.
Case capacity is 1/2 pint (.4L).
3. Check engine oil level. Refer to the engine
manual for the appropriate amount and weight of
oil.
4. Inspect the chassis for proper lubrication. When
lubricating, be sure to wipe the lubrication fittings
before and after lubrication.
MATAWAY
OVERSEEDER
Publicité
