Publicité
MATAWAY
OVERSEEDER
TRANSPORTING
The unit may be transported under it's own
power. With the lift lever up and the clutch
control disengaged, start the engine and
compress and hold the operator presence lever.
Engage only the drive transmission clutch by
pushing the clutch control forward without pulling
the reel control lever back. Set the throttle to the
operator's desired walking speed.
The unit may be loaded into the back of a truck or
trailer using a gradual sloped ramp and operating
the unit in the same manner as stated previously.
Use adequate lifting device and/or assistance
when loading and unloading unit. If loading
by ramp, be sure ramp is properly supported.
Keep hands and feet from underneath the unit
while operating or ramp loading the unit.
TRANSPORTING
GB-25
Publicité
