Publicité
No.
Malfunction
When Cleaning Sink is full
of water and water cannot
19
be drained out, the voice
reports that the Cleaning
Sink is full�
Possible Causes
The Dirty Water Tank is not properly installed�
The sealing plugs in the Dirty Water Tank is not installed
properly�
The Station cannot drain water normally�
The suction port of the Cleaning Sink is blocked by foreign
object�
The voice prompt still exists after trying the above
solutions�
The Cleaning Sink and Base Filter are dirty
Solutions
Tap down on the Dirty Water Tank to ensure it is properly installed�
Make sure that the sealing plugs are properly installed�
Long press
to see whether the Station can properly draw
the water� If the water is successfully drawn, wipe dry the Water
Overflow Sensor of the Cleaning Sink� If the Station fails to draw
the water, check between the Dirty Water Tank and the Station for
foreign object and clean it�
Ensure that there is no foreign object in the suction port of the
Cleaning Sink�
Power cycle the Station� If this problem persists, please contact
Customer Support for help�
Wash the Cleaning Sink and Base Filter with clean water�
35 EN
Publicité
