Publicité
No.
Malfunction
13
Fail to empty the Dust Bin�
The inner side of Dust Collection
14
Cabin is dirty�
Dust leakage occurs during work-
15
ing�
16
Mopping Pad Plate cannot rotate�
DEEBOT does not respond to the
17
Station instruction�
18
Driving wheels are blocked�
EN
34
Possible Causes
The Station detects a decrease in empty efficiency�
The outlet of Dust Bin is blocked by foreign objects�
Fine particles are absorbed in the inner side of Dust
Collection Cabin through the Dust Bag�
The Dust Bag is broken�
The outlet of Dust Bin is blocked by foreign objects�
Mopping Pad Plate is not correctly installed�
The Mopping Pad Plate is blocked by foreign objects�
DEEBOT is not in the Station�
Driving wheels are blocked by foreign objects�
Solutions
Replace the Dust Bag according to the [Maintenance] section and
close the Dust Collection Cabin� If the Dust Bag is not full when
ECOVACS HOME App prompts, you can put it back again�
Remove the Dust Bin and clean the foreign objects on the outlet�
Clean the inner side of Dust Collection Cabin�
Check the Dust Bag� Replace it�
Remove the Dust Bin and clean the foreign objects on the outlet�
Please install Mopping Pad Plate correctly� A sound of Click means
properly installation
Clean the foreign objects�
Please make sure DEEBOT is in the Station�
Please rotate and press the driving wheels to check whether there
is any foreign object wrapped or stuck� If there is any foreign
object, please clean it in time� If this problem persists, please
contact Customer Support for help�
Publicité
