Publicité
No.
Malfunction
DEEBOT returns to the
6
Station before it has finished
cleaning�
DEEBOT is unable to
7
charge�
Running is very loud during
8
cleaning�
DEEBOT gets stuck while
9
working and stops�
EN
32
Possible Causes
The room is so large that DEEBOT needs to return to
recharge�
DEEBOT is unable to reach certain areas blocked by furni-
ture or barriers�
DEEBOT is not switched ON�
DEEBOT's Charging Contacts are not connected to the
Station's Charging Contacts
The Station is not connected to the power supply�
Side brush and floating rubber brush are entangled� Dust
bin and filter are blocked�
DEEBOT is in Max Mode�
DEEBOT is tangled with something on the floor (electrical
wires, curtains, carpet fringing, etc�)
DEEBOT might be stuck under furniture with an entrance of
similar height�
DEEBOT is stuck in a narrow area�
Solutions
Please enable Continuous Cleaning� For more details, please follow
the App instructions�
Tidy up the area to be cleaned by putting furniture and small objects
in their proper place�
Switch ON DEEBOT�
Make sure that the robot's Charging Contacts have connected to
the Station's Charging Contacts and
DEEBOT's and Station's Charging Contacts are dirty� Please clean
these parts according to the instructions in the [Maintenance]
section�
Make sure the Station is connected to the power�
It is recommended to clean the side brush, floating rubber brush,
dust bin, filter, etc� regularly�
Switch to Standard Mode�
DEEBOT will try various ways to free itself� If it is unsuccessful,
manually remove the obstacles and restart�
Please set a physical barrier, or set a Virtual Boundary via the
ECOVACS HOME App�
Tidy up the house� Or set a physical barrier� Or set a Virtual
Boundary via the ECOVACS HOME App�
flashes� Check whether
Publicité
