Publicité
CoNTENTS | INSTALLATIoN
General information
INSTALLATION
1.
General information ������������������������ 11
1.1
Relevant documents ������������������������� 11
1.2
other symbols in this documentation ����������� 11
1.3
Units of measurement ����������������������� 11
2.
Safety ������������������������������������ 11
2.1
Intended use ������������������������������� 11
2.2
General safety instructions �������������������� 11
2.3
Instructions, standards and regulations ��������� 12
3.
Product description ������������������������� 12
3.1
Type of connection �������������������������� 12
3.2
Standard delivery ��������������������������� 12
3.3
Accessories �������������������������������� 12
4.
Installation �������������������������������� 13
5.
Maintenance ������������������������������� 14
5.1
Safety valve �������������������������������� 14
5.2
Pressure gauge ����������������������������� 14
5.3
Venting the system �������������������������� 14
6.
Specification ������������������������������� 15
6.1
Pump curves ������������������������������� 15
6.2
Connection diagrams ������������������������ 16
6.3
WPF-Sets ���������������������������������� 17
GUARANTEE
ENVIRONMENT AND RECYCLING
WPKI-Set
INSTALLATIoN
1. General information
The chapter „Installation" is intended for heating contractors.
Note
Read these instructions carefully before using the ap-
pliance and retain them for future reference.
Pass on the instructions to a new user if required.
1.1
Relevant documents
operating and installation instructions for system
components
1.2 Other symbols in this documentation
Note
General information is identified by the symbol shown
on the left.
f Read these texts carefully.
f
Symbol
Meaning
Material damage
!
(Appliance and consequential losses, environmental
pollution)
Appliance disposal
f This symbol indicates that you have to do something. The
f
action you need to take is described step by step.
1.3 Units of measurement
Note
All measurements are given in mm unless stated other-
wise.
2. Safety
only a qualified contractor should carry out installation, com-
missioning, maintenance and repair of this system.
2.1
Intended use
The compact heat pump installation set WPKI-Set is a compo-
nent of the heat pump system and is designed for the hydraulic
connection of the heat source and heat consumer side . Any
other use beyond that described shall be deemed inappropria-
te. observation of these instructions and of instructions for any
accessories used is also part of the correct use of this appliance.
2.2 General safety instructions
We guarantee trouble-free function and operational reliability
only if the original accessories and spare parts intended for the
system are used.
| 11
Publicité
