Publicité
External input
It is possible to connect an external input such as a camera or a computer. Press the on/
off button once to toggle between the available inputs until the image of the external input is
displayed on the screen of the i-See.
Adjust the display modes, brightness, contrast, white balance and advanced reading aides of
the external image as described above.
Tap or press and hold the minus or plus icon to zoom out or in. When zoomed in, it is possible
to pan through the image by pressing and holding the magnifier icon and sliding your finger in
the direction you want to pan the image. Always start from the magnifier icon to start panning.
6
Live view settings
EN
The i-See Speech contains a settings menu with which you can (de)activate certain functions of
the Live view mode. You can access the settings menu by ensuring the device is switched off,
then turning the device on using the
on/off button; press and hold until you hear a beep after the
start up tone.
By tapping the brightness icon (B3) you can cycle
through multiple screens of selectable options. Tap
the plus icon of the zoom button (B2) to highlight
which mode you wish to change.
You can recognize the highlighted function by the
white rounded rectangle around it. Tap the magnifier
icon to activate/deactivate your selection.
The alternative method is by using the remote control.
The wheel is used for highlighting the function. The
button on the right ('external input') to cycle through
multiple screens. With the button on the left you can
activate/deactivate your selection.
The process of saving the changes and exiting is
described at the end of the chapter.
Display modes
On the first screen you can select whether
you want the photo mode to have realistic
or high saturation colors by activating
the photo mode (A) and select which
high contrast mode you want available
in your Live view mode by activating the
high contast mode you want activated/
deactivated.
32
i-See Speech
Publicité
