Publicité
LED Lightning
The brightness of the LED lighting on the tableau can be adjusted to prevent reflections or to be
less intense in dark environments by reducing the light from the LEDs or turning them off. To
do this, press and hold the magnifying glass icon until a light bulb icon appears on the screen
with a value between 0 and 5 (0 indicates the LEDs are off and 5 indicates the LEDs are at the
brightest level). Use the minus and plus touchpad icons to change the value down or up as
required. Please note that reducing the brightness may result in low image quality, increased
sensitivity to shadows or cause text to disappear. If this happens, increase the brightness or
adjust the contrast accordingly.
Brightness
By tapping this icon (B3) you can cycle through 5 brightness levels.
Brightness can't be adjusted when reading aids are in use.
B3
EN
Contrast
In contrast mode, swipe over this icon (B3) from left to right (and hold your finger on
the right side of the rectangle) or right to left (and hold your finger on the left side of the
rectangle) to gradually increase or decrease the contrast. The contrast icon is shown in
grayscale.
Contrast can't be adjusted when reading aids are in use and can only be adjusted in high
contrast modes, not in photo modes.
White balance
In photo mode,
swipe over this icon (B3) from left to right (and hold your finger on the
right side of the rounded rectangle) or right to left (and hold your finger on the left side
of the rounded rectangle) to gradually change the white balance to the colder, more
blue side or change the white balance to the warmer, more orange side. The white balance icon
has multiple colors.
White balance can't be adjusted when reading aids are in use and can only be adjusted in photo
modes, not in high contrast modes.
White balance adjustment is turned off by default. To turn it on read Chapter 6 Live view settings.
Advanced reading aids
Press and hold the brightness icon (B3) to enter the Advanced reading aids menu.
The following reading aids are available:
horizontal
vertical
horizontal line
vertical line
blanking
blanking
Swipe up or down over this icon to select the desired reading aid required. Each reading aid has
5 settings that are indicated by a number shown in the icon.
Once the desired reading aid is selected, tap this icon to set the desired setting of the reading
aid. To change the setting value you can tap this icon to go to the next level or you can swipe
from left to right.
To change to a different reading aid then swipe up or down over this icon and then tap to set the
desired level of the reading aid selected.
To exit from the advanced reading aids menu press and hold this icon (B3) for 2 seconds. The
reading aid will now disappear from the screen.
Brightness, contrast and white balance can't be adjusted when reading aids are in use.
i-See Speech
31
Publicité
