Publicité
Left:
The tableau can be moved freely.
Middle-left: Free movement from left to right.
5-millimetre increments can adjust
the front-to-back direction.
Middle-right: Free movement from left to right.
Front-to-back direction is blocked.
Right:
Tableau position is completely locked.
Connections
On the left side of the display:
• Headphones
• USB
At the back of the device:
• Power
• Remote control receiver
• 2x HDMI
Installation
The i-See will be delivered to you in a pre-assembled state.
Get the device out of the box
The top of the box can be opened, allowing the device to be lifted out of the
box. Note that the weight of the device is around 17 kg. Lift the device from
the back by holding both arms. Place the i-See on a stable and horizontal
surface. Remove the foam blocks and store them in the original box.
Positioning
Height:
The height of the screen can be adjusted by firmly holding
the screen on the left and right side, and pulling the screen
up or down to your preferred position.
Tilt:
The screen can be tilted by firmly holding the screen on the
left and right side and tilting the screen in your preferred
position.
Power adapter
Place the round connector from the power adapter to the
power input at the back of the device. It will fit only in one
direction so keep the flat part of the connector towards
you. Connect the other end of the power adapter into the wall socket.
i-See Speech
Left
Middle-left
Middle-right
Right
Power
Remote control
receiver
HDMI
HDMI
A
B
C
H
D
E
F
G
(XX)
I
2
1
EN
3
29
Publicité
