Publicité
Control panel
Press
to switch on or off the panel.
Note! Only the exterior and interior lighting functions without press on
Time settings
Left display indicates the amount of operating time remaining. Press
press
to decrease the time. This is done with 5-minute intervals. Max operating time is 60
minutes.
Temperature settings
Right display refers to control of the set temperature and also indicates the actual temperature
inside infra cabin. At boot the desired flash temperature for about 5 minutes.
switching of ˚C and ˚F.
temperature. This is done with 1-degree intervals. After the desired temperature is set, the
number of temperature will flash for about 3 seconds. After the numbers of the set temperature
stop flashing, the number indicated will show actual temperature inside infra cabin. Maximum set
of temperature is 65
˚C/150˚F.
Lighting
Press
to switch on and off the internal light.
Press
to switch on and off the external light.
Infra bench heater
Press
to switch on and off the bench heater.
Light therapy system
To activate the color therapy system press
system will go into an automatically cycling mode, changing color every 8 seconds:
Press 2x
and the light system will glow GREEN. Press 3x - RED. Press 4x - BLUE. Press 5x
- YELLOW. Press 6x - TURQUOISE. Press 7x - VIOLET. Press 8x - the light system will turn off.
Color light system automatically goes off if power is turned off.
Time settings
Temperature
settings
Press
to increase the temperature and press
RED
YELLOW
VIOLET
BLUE
On/Off
Light therapy system
Internal lighting
External lighting
Bench heater
Celcius/Fahrenheit
. Upon turning the system on, the color light
GREEN
TURQUOISE
18
.
to increase the time and
˚C/˚F refer to the
to decrease the
Publicité
