Publicité
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death.
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends first and foremost on you!
TRANSPORT
Damaged or not sufficiently viable hoists and lifting devices can cause serious injury or
even death. Always check hoists and load lifting devices for adequate load-bearing
capacity and perfect condition, carefully fasten the loads and never keep them under
suspended loads.
•
Prepare two pieces of ropes or belts (C) with appropriate load-bearing capacity and length;
•
Hook the ropes to the crane hook (D);
Attach the ropes to the four lifting eyes of the machine.
•
Position the crane so that the machine can be lifted without tipping.
•
•
Gently lift the machine to avoid shocks and load fluctuations and carefully transport it to
the installation site.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
D A N G E R
W A R N I N G
C A U T I O N
N O T E
W A R N I N G
To ensure proper transport, also observe the instructions and
information on the transport packaging regarding centre of
gravity, attachment points, weight, means of transport to be
used and the prescribed transport position, etc..
NOTE:
To lift the machine, you need a forklift truck (A) with the
appropriate load capacity and a fork of at least 1200 mm length
or a crane.
The fork (B) of the truck should be positioned under the
machine as shown in the illustration on the left.
If you are using a crane, proceed as follows:
TRANSPORT
34
HOB415_400V
Publicité
