Publicité
EnGLIsh
CORDLESS TABLE SAW
DCS7485
WARNING: Read all safety warnings, instructions,
illustrations, and specifications in this manual,
including the battery and charger sections provided in
an original tool manual or the separate Batteries and
Chargers manual. Manuals can be obtained by contacting
Customer Service (refer to the back page of this manual).
Technical Data
Voltage
Type
Battery type
No load speed
Blade diameter
Blade bore
Blade kerf
Blade body thickness
Riving knife thickness
Depth of cut at 90°
Depth of cut at 45°
Max. bevel angle
Max. mitre angle
Ripping capacity (Right of blade)
Ripping capacity (Left of blade)
Work surface dimensions
Overall dimensions
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841-1:2015:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound level)
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However if the
tool is used for different applications, with different accessories or
poorly maintained, the vibration and/or noise emission may differ.
This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the total
working period.
30
DCS7485
V
54
DC
10
Li-Ion
min
-1
5800
mm
210
mm
30
mm
1.8
mm
1.3
mm
1.6
mm
65
mm
45
°
-2–47
°
-60–60
mm
622
mm
318
mm
485 x 485
mm
605 x 605 x 330
kg
20.6
dB(A)
87.4
dB(A)
105.2
dB(A)
3
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool
and the accessories, keep the hands warm (relevant for vibration),
organisation of work patterns.
EC-Declaration of Conformity
Machinery Directive
Cordless Table Saw
DCS7485
D
WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-1:2015 + AC:2015
+ A11:2022, EN 62841-3-1:2014 + AC:2015 + A11:2017 +
A12:2021 + A1:2021.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice President of Engineering, PTE-Europe
D
WALT, Richard-Klinger-Straße 11,
e
65510, Idstein, Germany
05.07.2024
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this power
tool. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE.
WALT at
e
WALT.
e
Publicité
