Publicité
6. Lift and rotate center insert 180 degrees.
7. Reassemble the center insert and outer door ring with the four
screws.
Reverse Hinge
1. Use a small flat-blade screwdriver to remove the two plug
strips from the inner door. Slide the head of the screwdriver
under the plugs, without scratching the inner door surface,
and lift up the strip.
2. Remove the four screws that attach to inner door hinge.
26
3. Move hinge to other side. Reinstall the four screws.
4. Reinstall plug strips on opposite side of the inner door.
5. Check for fingerprints on the glass. Clean if necessary.
Replace the Door Assembly
1. Place the inner door assembly inside the outer door assembly.
2. Reassemble the inner and outer door assemblies with the six
screws.
Publicité
