Publicité
If your outlet looks like this:
If your outlet looks like this:
Then choose a 4-wire power supply cord with
Then choose a 4-wire power supply cord with
ring or spade terminals and UL listed strain
ring or spade terminals and UL listed strain
relief. The 4-wire power supply cord, at least
relief. The 4-wire power supply cord, at least
4 ft (1.22 m) long, must have four 10-gauge
4 ft (1.22 m) long, must have four 10-gauge
copper wires and match a 4-wire receptacle of
copper wires and match a 4-wire receptacle of
4-wire
4-wire
NEMA Type 14-30R. The ground wire (ground
NEMA Type 14-30R. The ground wire (ground
receptacle
receptacle
conductor) may be either green or bare. The
conductor) may be either green or bare. The
(14-30R)
(14-30R)
neutral conductor must be identified by a white
neutral conductor must be identified by a white
cover.
cover.
If your outlet looks like this:
If your outlet looks like this:
Then choose a 3-wire power supply cord with
Then choose a 3-wire power supply cord with
ring or spade terminals and UL listed strain
ring or spade terminals and UL listed strain
relief. The 3-wire power supply cord, at least
relief. The 3-wire power supply cord, at least
4 ft (1.22 m) long, must have three 10-gauge
4 ft (1.22 m) long, must have three 10-gauge
copper wires and match a 3-wire receptacle of
copper wires and match a 3-wire receptacle of
3-wire
3-wire
NEMA Type 10-30R.
NEMA Type 10-30R.
receptacle
receptacle
(10-30R)
(10-30R)
Dryer Direct Wire
Dryer Direct Wire
WARNING
WARNING
Use 10 gauge copper wire.
Use 10 gauge copper wire.
Use a UL listed strain relief.
Use a UL listed strain relief.
Disconnect power before making electrical connections.
Disconnect power before making electrical connections.
Connect neutral wire (white or center wire) to center
Connect neutral wire (white or center wire) to center
terminal (silver).
terminal (silver).
Ground wire (green or bare wire) must be connected to
Ground wire (green or bare wire) must be connected to
green ground connector.
green ground connector.
Connect remaining 2 supply wires to remaining
Connect remaining 2 supply wires to remaining
2 terminals (gold).
2 terminals (gold).
Securely tighten all electrical connections.
Securely tighten all electrical connections.
Failure to do so can result in death, fire, or
Failure to do so can result in death, fire, or
electrical shock.
electrical shock.
If connecting by direct wire:
If connecting by direct wire:
Power supply cable must match power supply (4-wire or 3-wire)
Power supply cable must match power supply (4-wire or 3-wire)
and be:
and be:
■ Flexible armored cable or nonmetallic sheathed copper cable
■ Flexible armored cable or nonmetallic sheathed copper cable
(with ground wire), covered with flexible metallic conduit. All
(with ground wire), covered with flexible metallic conduit. All
current-carrying wires must be insulated.
current-carrying wires must be insulated.
■ 10-gauge solid copper wire (do not use aluminum).
■ 10-gauge solid copper wire (do not use aluminum).
■ At least 5 ft (1.52 m) long.
■ At least 5 ft (1.52 m) long.
12
Fire Hazard
Fire Hazard
STACKED WASHER/ELECTRIC DRYER
STACKED WASHER/ELECTRIC DRYER
ELECTRICAL REQUIREMENTS-CANADA ONLY
ELECTRICAL REQUIREMENTS-CANADA ONLY
WARNING
WARNING
Electrical Shock Hazard
Electrical Shock Hazard
Plug into a grounded 3 or 4 prong outlet.
Plug into a grounded 3 or 4 prong outlet.
Do not remove ground prong.
Do not remove ground prong.
Do not use an adapter.
Do not use an adapter.
Do not use an extension cord.
Do not use an extension cord.
Failure to follow these instructions can result in death,
Failure to follow these instructions can result in death,
fire, or electrical shock.
fire, or electrical shock.
Washer Electrical Requirements
Washer Electrical Requirements
■ Do not have a fuse in the neutral or ground circuit.
■ Do not have a fuse in the neutral or ground circuit.
■ If codes permit and a separate ground wire is used, it is
■ If codes permit and a separate ground wire is used, it is
recommended that a qualified electrician determine that the
recommended that a qualified electrician determine that the
ground path is adequate.
ground path is adequate.
■ Check with a qualified electrician if you are not sure the
■ Check with a qualified electrician if you are not sure the
washer is properly grounded.
washer is properly grounded.
Stacked Washer/Electric Dryer Grounding
Stacked Washer/Electric Dryer Grounding
GROUNDING INSTRUCTIONS
GROUNDING INSTRUCTIONS
For a grounded, cord-connected dryer:
For a grounded, cord-connected dryer:
I
I
This dryer must be grounded. In the event of malfunction or
This dryer must be grounded. In the event of malfunction or
breakdown, grounding will reduce the risk of electric shock
breakdown, grounding will reduce the risk of electric shock
by providing a path of least resistance for electric current.
by providing a path of least resistance for electric current.
This dryer is equipped with a cord having an equipment-
This dryer is equipped with a cord having an equipment-
grounding conductor and a grounding plug. The plug must
grounding conductor and a grounding plug. The plug must
be plugged into an appropriate outlet that is properly
be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes
installed and grounded in accordance with all local codes
and ordinances.
and ordinances.
WARNING:
WARNING:
Improper connection of the equipment-
Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
grounding conductor can result in a risk of electric shock.
Check with a quali ed electrician or service representative
Check with a quali ed electrician or service representative
or personnel if you are in doubt as to whether the dryer is
or personnel if you are in doubt as to whether the dryer is
properly grounded. Do not modify the plug provided with
properly grounded. Do not modify the plug provided with
the dryer: if it will not t the outlet, have a proper outlet
the dryer: if it will not t the outlet, have a proper outlet
installed by a quali ed electrician.
installed by a quali ed electrician.
SAVE THESE INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Publicité
