Publicité
Security Management
1) Change Password: providing the entrance
for modifying the password login of Config
Tool. Input the Initial Password in the
Reset Password box, then Input
Password, Confirm Password, then click
Save. (Prompt: the password must be
composed of 6-15 bits of numbers, letters
(case sensitive) and underline, for example:
Password_001.)
If password reset is finished, the following
prompt box pops up. Click Confirm to
restart Configuration Tool.
Vista Gateway Instructions for use
2) Privacy Protection: If the Privacy
Protection is checked, the password
verification box will pop up in case of the
user's operations concerning security and
sensitive information. The user can perform
the next operation only if the user enters the
right password which is identical with the
login password of the Config Tool. If the
Privacy Protection is unchecked, all the
verification steps are cancelled, and the
user enters the next operation directly. The
Privacy Protection is defaulted to be
checked.
Gateway Application Strategy: configure the
account strategy of the user's operation system
to improve the security of the operation system.
For example, disable remote control, open
screensaver, disable Guest user, open login
verification, promote log directory permissions,
etc. can be implemented for the account
strategy. The following prompt will pop up
before the application strategy is used, click
Confirm to implement it.
In order to ensure Gateway is running in the
safe environment, it is recommended to run
Gateway in an independent end system and
improve the security strategy level of the
system. Some strategies shall be opened under
the user's determination, such as firewall,
disable Administrator/ multi-user, remote
assistance, serial/USB usage, etc.
Configuration
51
Publicité
