Maintenance; Replacing The Oil; Cleanliness - SKF TMJL 100 Mode D'emploi

A B
C
A Oil release valve
B Handle block pin
C Pressure gauge

4. Maintenance

4.1 Replacing the oil

When replacing the oil or after maintenance, make sure no air is trapped in the system.
This should be checked before attaching the hose to the application by making sure only
air-free oil comes out of the hose when pumping. Only use clean, recommended
hydraulic oils.

4.2 Cleanliness

Keep the pump clean from dirt and metal particles in order to avoid excessive wear.
6 SKF TMJL 100