gaviota Kyma Manuel D'installation page 52

KÝMA
Step 24. (Common)
Place the frontal profiles, introduced in Step 18, 19 (Type 1 and 2), in the correct
position and attach with a no. 3 Allen key. Repeat in all the arms assembled in
the system.
Align the support frontal profile of the charge
profile with the arm support frontal profile
Step 25. (Common)
Once all the frontal profiles are regulated, take off the arm safety bands
and close the box. The wall/ceiling supports must now be installed at the
client's home. The arms have a heavy spring. Be careful during this step.
52
INSTALACIÓN DEL SISTEMA EN CASA DEL CLIENTE:
Step 26. (Common)
Align the elbow frontal profile of the
charge profile with the arm elbow
•
Ceiling support assembly
Assemble as many box supports to the ceiling supports as arms are in the
installation. Attach them with four DIN933 or DIN931 M10x40 screws, eight
DIN125 M10 washers and four DIN985 M10 nuts with two no. 17 spanners.
Holes where the
support is mounted
All dimensions in mm, unless otherwise stated.