gaviota Kyma Manuel D'installation page 47

Step 5. (Common)
•
Motor
First fix the motor support to the motor header with two DIN7991 M6x25
screws, using a no. 4 Allen key.
Salida del cable de
iluminación para brazos
Concept con iluminación
Step 6. (Type 1 and 2)
•
Gear
Fix the gear in a single position with two DIN7991 M6x45 screws, two DIN985
M6 nuts and a no. 4 Allen key.
- GEL 1:11 120 eye (Code 80010348).
All dimensions in mm, unless otherwise stated.
Salida para el cable
del motor y cable de la
iluminación
ONLY FOR TWO ARMS MAX. PROJECTION 3.50m
Light cable outlet
for Concept arms with
illumination
Step 7. (Common)
Fix the side supports to the box profile (point side and motor/gear) with three
DIN7981 4.2x25 self-drilling screws and a Phillips screwdriver.
Step 8. (Common)
•
Motor
Thread the motor cable through the hole indicated in Step 5.
KÝMA
47