Télécharger Imprimer la page

Parkside 373102 2104 Instructions D'utilisation Et Consignes De Sécurité page 40

Perceuse-meuleuse de précision sans fil

Publicité

Start charging
Connect the USB-C plug on the USB
[
5 ]
charging cable
[
4 ]
.
Connect the USB-A plug on the USB
5 ]
[
charging cable
Connect the charger to a mains power
socket.
The battery is fully charged when the battery
[
2 ]
LED
lights up red/orange/green.
Stop charging
Disconnect the USB charging cable
the product.
Pull the charger out of the power outlet.
Checking the battery charge level
If the product is switched on, the remaining
charge is indicated by the battery LED
2 ]
[
Battery LED
Red/orange/green Maximum charge
Red/orange
Red
Changing/inserting the tool/
collet chuck
m
WARNING!
Always switch the product off and let the
product cool down before cleaning or
making any adjustments!
to the charging socket
to the charger.
5 ]
[
from
2 ]
[
:
Charging level
Medium charge
Low charge: Charge the
battery
m
CAUTION! RISK OF INJURY!
Keep your hands away from the
accessory tool when the product is in
operation.
After the product has been switched off,
the accessory tool continues moving for
some time. Do not touch the accessory
tool and do not attempt to brake it.
Only use accessory tools recommended
by the manufacturer. Using other
accessory tools and other accessories can
represent a risk of injury for you.
Only use accessory tools, which bear
information about the manufacturer, type
of binding, dimension and permitted
number of revolutions.
Only use accessory tools where the
printed rotational speed is at least as high
as what has been specified on the product
marking.
Do not use any broken, cracked, or
otherwise damaged accessories.
Only use flawless accessory tools.
Ensure that the accessory tool dimensions
match those of the product.
Never re-drill a locating hole which is too
small to make it larger.
Never use separate bushings or adaptors
in order to make wheels with a hole that is
too large fit the product.
Support plates or workpieces to reduce
the risk of kickback from a jammed wheel.
Large workpieces may bend under their
own weight. The workpiece must be
supported on both sides of the wheel,
near the wheel as well as at the edge.
GB/IE
41

Publicité

loading

Ce manuel est également adapté pour:

Pfbs 12 c5