Hydromassage; Blower - Jacuzzi ALIMIA Manuel D'installation

I

HYDROMASSAGE

Press the "p1" button and/or the "p2" button to start one, or
both, of the two hydromassage pumps (the buttons may have
been connected differently during installation). Each of the two
hydromassage pumps manages a certain number of jets (see
drawings)
Press the button again to turn off the corresponding pump.
A default maximum operating time of 20 minutes has been
memorized.
When the hydromassage pumps and/or the blower are switched
on, the ozonator (if present) is switched off, and remains off for 15
minutes after the last shutdown (see chapter on ozonator).
Vice versa, when the hydromassage pumps and/or the blow-
er are turned on, if the filtering pump is off it is automatically
started and kept running for 15 minutes after the last shutdown
(see chapter on water filtering). If the pumps or blower are on, it
means there are people in the tub, and therefore the water needs
to be filtered to keep it clean.
Virginia XP
Sienna XP
Alimia XP
p1
Enjoy XP
p1
p2
p1
I

BLOWER

Press the button "b" to turn on the blower (if installed in the
system): the specific nozzles (see drawing) supply air bubbles,
p2 which are introduced into the water by a compressor fit on the
spa-pak. Press the button again to turn off the blower.
35
p2
p1
p2
p1