Bose S1 PRO+ Notice D'utilisation page 40

CHANGE BETWEEN MIC AND LINE INPUT
With the Bose Wireless Mic/Line Transmitter, you can change between mic and line
input settings to match the input requirements of your source.
To do so, press and hold the Power button I and MUTE button until the transmitter
icon on the channel display changes to reflect the new input setting.
CONNECT EFFECTS TO A CHANNEL INSERT WHEN USING A
WIRELESS TRANSMITTER
When you connect a wireless transmitter to a channel which has the Insert setting
set to Auto (see page 41), the l (6.35 mm) TRS channel input becomes a series
channel insert (also known as an effects loop). You can connect effects units or
pedals to the input using an insert cable, all while using your instrument or
mic wirelessly.
For sample setup scenario images, see page 47.
NOTES:
• An insert cable (l or 6.35 mm TRS to dual l or 6.35 mm TS) is required to
connect an effects unit to a channel insert. You can purchase an insert cable at
your local music retailer.
• Don't connect an instrument or other audio source to the input using a standard
l (6.35 mm) cable when a wireless transmitter is connected to the channel. This
prevents audio from playing from both the wired and wireless source.
WIRE L E S S T RANS M IT TE R C O NT RO LS
MUTE
4 0
VOLUME
Mic input
|
E N G
LINE
LINE
VOLUME
Line input