CHARGE A WIRELESS TRANSMITTER
Using the charging ports
Fully insert the wireless transmitter into the wireless transmitter charging port for
either Channel 1 or 2 until you hear or feel a click.
If the system is powered on, on the channel display, a battery icon with a lightning
bolt next to it briefly appears to indicate that the transmitter battery is charging. A
lightning bolt icon then appears in the upper-right corner of the display. When the
transmitter is fully charged, the lightning bolt icon disappears (see page 60).
NOTE: If the system is connected to power, the AC (mains) power connection charges
the transmitter. If the system is operating on battery power, the
system battery charges the transmitter.
Using a wall charger or computer
NOTE: Use this product only with an agency-approved LPS power supply that meets
local regulatory requirements (e.g., UL, CSA, VDE, CCC).
1. Connect one end of a USB-C cable (not provided) to the USB-C port on the top of
the wireless transmitter.
2. Connect the other end to a USB-A wall charger or computer.
The power light glows solid white (see page 62). When the transmitter is fully
charged, the power light turns off.
BAT TE RY
VOLUME
|
5 5
E N G