Publicité
Les langues disponibles
Les langues disponibles
is connected to the mains, or reconnected to the mains,
within the next 2 minutes.
To set the Power Limitation:
• press
(which will flash, only for the first 2 minutes
after the product has been switched on)
• while keeping it held down, press, one at a time, all the
Selection/Display areas (2) of the cooking zones, in this
sequence, (FL-2 -> FR-2) as shown in the figure:
At this point, the Display (FR-2) will show the symbols
and
alternately and the Display (FL-2) will show the
symbol
• select the Display (FR-2), the Selection bar (3) will light
up; select the penultimate vertical line on this bar. Now, the
Display (FR-2) will show the symbols
alternately.
At this point, it will be possible to change the absorption
value of the hob: select the Display (FL-2) and the
Selection bar (3) will light up again; select one of the three
available positions on this bar; according to this choice, the
Display (FL-2) will show a value between
The following table relates the displayed value to the
maximum absorption of the Hob:
Displayed value
Power (Kw)
3.6 Kw (default setting)
3.6 Kw
3.1 Kw
To save the selection made, press the ON/OFF (1) key for
2 seconds; an extended audible signal will be emitted to
confirm the setting.
● Key Lock
The Key Lock allows you to lock the settings of the hob to
prevent accidental tampering with the same, while leaving
the set functions enabled.
Activation:
• press
(10) Repeat the operation to deactivate.
Note: if any other function is pressed while the Key Lock is
active, the symbol
is in use and must be deactivated if necessary in order to
use the hob.
● Automatic Heat UP
The Automatic Heat UP function allows the set power to be
reached more quickly; with this function it is possible to
cook food faster without the risk of burning it, insofar as the
temperature does not exceed the set level. This function is
available for power levels from
Activation:
• with the cooking zone on, press
will show a flashing
the cooking zone.
By increasing the power level of the cooking zone: the
Automatic Heat Up function remains active, with the new
temperature setting;
By decreasing the power level of the cooking zone: the
Automatic Heat Up function is deactivated.
Note: by selecting another cooking zone at the same time,
the symbol
light intensity, and it will be possible to proceed, also for
this zone, with the activation of the function; in any case,
the function remains active in the zone in which it has
and
already been set, as indicated in the Display (2).
● Pause
The Pause function allows active functions on the hob to be
suspended, bringing the cooking power to zero.
Activation:
and
.
• press
To deactivate the function:
• press
• press/slide on the Selection Bar (3) to deactivate the
function.
Note: deactivation restores the conditions of the hob before
the pause; the hob continues to work with the same
settings previously set.
Note: if after 10 minutes, the Pause Function is not
deactivated, the hob will turn off automatically.
● Temperature Manager (Warming Function)
Temperature Manager is a control function that allows the
maintaining of heat at a constant temperature, at an
optimised power level; ideal to keep ready-cooked foods
warm. The Temperature Manager function is activated the
first time the key
The symbol
working in the Temperature Manager
Note: by selecting another cooking zone at the same time,
15
will flash to indicate that the function
to
, alternating with the power set in
(7) will go back to being illuminated with
(9), the symbol
will flash on the display (2)
(9) the Selection bar (3) will light up
(8) is pressed.
appears in the display (2) of the zone that is
.
(7), the Display (2)
Publicité
