Milwaukee M18 RLOH600 Notice Originale page 17

TECHNICAL DATA
Type
Production code
Laser class
Self-leveling range
Self-leveling time
Travel startup time @ 8°
Battery technology
Voltage DC
Protection class (water and dust protection)
Drop/Tip Rating
Max. altitude
Relativ air humidity max.
Pollution degree according to IEC 61010-1
Functions
Projections
Diode quantity
Diode type
Laser beams output pattern
Operating time
Tripod mount
Suitable detector
Laser Line
Recommended ambient operating temperature
Storage temperature
Recommended battery types
Dimensions
Weight according EPTA-Procedure 01/2014
32
M18 RLOH600
Rotation Laser
4975 28 01 XXXXXX MJJJJ
2
10° in X or Y Axis or +/-5° in given direction
< 12 sec
< 35 sec
Li-Ion
18 V
IP66 (the Lithium-ion battery and the battery compartment are excluded from IP 66)
1,5 m
2000 m
80%
2 (only non-conductive deposits occur, whereby occasional temporary
conductivity caused by condensation is expected)
Rotation level line
360° line red
1
5 mW
Horizontal level line
40 h with 2.0 Ah battery
5/8" thread
Milwaukee RD600
Width < 8,75mm @ 15 m
Wavelength: 620-690 nm
Max. power: PAVG ≤ 3,3 mW
Horizontal plane accuracy: ±2,4 mm @ 30 m
Beam divergence: < 1.5 mrad
Pulse duration: Tp ≥ 1.5 ms
Rotational speed: 600 min -1
Colour: red
Working range (with detector): up to 600 m (diameter)
-20°C – +50°C
-20°C – +60°C
M18B...; M18HB
305 mm x 255 mm x 255 mm
3,83 kg ... 4,89 kg (2.0 Ah ... 12.0 Ah)
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
CAUTION! WARNING! DANGER!
Do not use the product before you have studied the Safety
instructions and the User Manual.
Laser Classifi cation
Laser Beam outlet
aperture (4x)
WARNING:
It is a Class 2 laser product in accordance
with EN 60825-1:2014+A11:2021 .
LASER
2
CONSUMER LASER PRODUCT
EN 50689:2021
Warning:
Avoid direct eye exposure. The laser beam can cause severe eye
damage and/or blindness.
Do not stare into the laser beam or direct it towards other people
unnecessarily.
Caution! The laser emitting product may be behind you in some
applications. Be careful when facing the product.
Warning:
Do not operate the laser around children or allow children to operate
the laser.
The refl ective surface could refl ect the beam back at the operator or
other persons.
Warning: Use of controls, adjustments, or the performance of
procedures other than those specifi ed in the manual may result in
hazardous radiation exposure.
When the laser is brought into a warm environment from very
cold conditions, or vice versa, allow it to come to the surrounding
temperature before use.
Always store the laser indoors, avoid substantial knocks, continuous
vibration or extreme temperatures.
Always keep the tool away from dust, liquids and high humidity.
These may damage internal components or aff ect accuracy.
If laser radiation hits your eye, you must close your eyes and
immediately turn your head away from the beam.
Do not position the laser beam so that it unintentionally blinds you
or others.
Do not look into a laser beam using magnifying optical devices such
as binoculars or a telescope, as this will increase the level of eye
injury.
If you use laser goggles to enhance the visibility of the laser beam,
please notice that they will not protect your eyes against laser
radiation.
Do not remove or deface warning labels on the laser level.
Do not disassemble the laser level, laser radiation can cause
serious eye injury.
Do not use aggressive cleaning agents or solutions. Use only a
clean, soft cloth for cleaning.
Avoid heavy impact to or dropping of the laser. The accuracy of
the laser should be checked before use if it has been dropped or
subjected to other mechanical stresses.
Any repair required on this laser product should be performed only
by authorised service personnel.
Do not operate the product in explosion hazardous areas or in
aggressive environments.
Do not expose battery to rain. Do not use battery in damp or wet
locations.
If working overhead, secure the laser with a MILWAUKEE shock
absorbing lanyard.
Remove the battery pack before starting any work on the machine.
Do not dispose of used battery packs in the household refuse or by
burning them. Milwaukee Distributors off er to retrieve old batteries to
protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
Use only System M18 chargers for charging System M18 battery
packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme load
or extreme temperatures. In case of contact with battery acid wash
it off immediately with soap and water. In case of eye contact rinse
thoroughly for at least 10 minutes and immediately seek medical
attention.
WARNING This device contains a lithium button/coin cell
battery. A new or used battery can cause severe internal
burns and lead to death in as little as 2 hours if swal lowed or
enters the body. Always secure the battery cover. If it does not close
securely, stop using the device, remove the batteries, and keep it
away from children. If you think batteries may have been swallowed
or entered the body, seek immediate medical attention.
Warning! To reduce the risk of fi re, personal injury, and product
damage due to a short circuit, never immerse your tool, battery pack
or charger in fl uid or allow a fl uid to fl ow inside them. Corrosive or
conductive fl uids, such as seawater, certain industrial chemicals,
and bleach or bleach containing products, etc., can cause a short
circuit.
SPECIFIED CONDITIONS OF USE
The laser is innovatively designed for a very broad range of
professional jobs, including:
- Aligning tiles, marble, cabinets, borders, moldings and trimmings
- Marking layout for doors, windows, rails, stairs, fences, gates,
decks and pergolas installation.
- It is intended for determining and checking horizontal and vertical
lines.
- Leveling suspended ceilings, Leveling pipe installations, Window
partitioning and pipe alignment, laying out perimeter walls for
electric installations.
Do not use this product in any other way as stated for normal use.
ONE-KEY™
To learn more about the ONE-KEY functionality for this tool, please
reference the Quick Start guide included with this product or go to
www.milwaukeetool.com/one-key. To download the ONE-KEY app,
visit the App Store or Google Play from your smart device.
Also, when the product experiences ESD, the Bluetooth
communication will be disconnected. It needs to be reset manually
to recover.
ENGLISH 33