Joerns Hoyer Stature Manuel De L'utilisateur page 7

English
5. Attach four point positioning cradle to the lift boom by inserting the split pin. Ensure pin is
secure.
6. Stand the Stature upright and apply the brakes.
Be careful when lifting the Stature to the upright position, as it is heavy.
Disassembly
The lift should not be disassembled unless for service, repair or transport if necessary. If
disassembly is necessary, follow the assembly instructions in reverse sequence.
7. Fit power pack to the lift and make sure the latch holding the pack in place is fully engaged.
"Click" in place.
8. Plug the handset and two cables from the mast into the bottom of the controller. Refer to the
drawing on page 8 for correct positions.
2
1
WARNING
Hoyer
®
Stature
7