•
Do not expose electric tools
to rain or wet conditions. The
penetration of water into an
electric tool increases the risk
of electric shock.
General Description
Function Description
The cordless lawn mower has a cutting
tool, which turns parallel to the cutting lev-
el. It features a powerful electrical drive,
a sturdy plastic casing, a safety switch, a
collision guard as well as a grass box.
Additionally, the equipment is height
adjustable to 5 levels and has smooth-
running wheels.
For the function of the operating parts,
please refer to the descriptions below.
The illustration how to handle the
appliance can be found on
page 2 - 3.
Summary
1 Curved handle
A
2 Mounting material for bow han-
dle attachment
2a Screws
2b Wing nut
2c Tensioning lever
3 Lower bar
4 Grass catcher
5 Collision guard
6 Device handle
7 Lever for cutting height adjust-
ment
8 Wheels
9 Housing
10 Cover for rechargeable battery
compartment
11 Battery
12 Contact key
13 Equipment cable
14 Cable holder
15 Locking button
16 Start lever
17 Battery charger
18 Blade
19 Blade bolt
20 Motor spindle
Assembling instructions
•
Alwayas wear cut-protection gloves
•
Undertake only work with which you
are confident.
•
In case of uncertainty, contact a spe-
cialist or contact our service directly
Assembling the Curved Handle
Installing lower bars:
1. Slide the two ends of the lower
handle bar (4) into the receptor
on the mower housing.
2. Fix the lower bar by means of
the tensioning levers (2c).
3. Lock the clamping levers (2c) by
pushing them towards the bar (1).
Clamping levers to be tightened
and contacting the bar such that
they clamp at average force.
Otherwise you may have to
tighten (turn clockwise) or loos-
en them (turn anticlockwise).
Installing upper handle:
4. Fix the curved handle (1) using
the enclosed screws (2a) and
the wing nuts (2b) on the lower
bar (3). There are two possible
positions.
Mounting cable holder:
5. Clip the cable holder (
into the bar (3) and thus fix the
A
cable (
GB
A
14)
13).
23