Alfa 8703 Manuel D'instructions page 42

40
4. Hook the thread on the corner
the thread through the looper thread guide.
5. Pass the thread through the changeable thread
guide.
6. Pass the thread through the looper thread
take-up lever (lower).
7. Pass the thread through the lower looper thread
guide (1).
Looper thread guide
Changeable thread guide.
Looper thread take-up lever (lower)
Lower looper thread guide (1)
8. Turn the handwheel toward you to move the lower
looper to the right side.
Then lift up the lower looper thread guide (1).
When you do this, the lower looper thread guide
(2) and (3) are moved to the right for easy
threading.
Pass the thread through the lower looper thread
guide (2).
9. Pass the thread through the lower looper thread
guide (3).
Lower looper thread guide (2)
Lower looper thread guide (3)
Holding the end of the thread, push the lower looper
thread guide (1) down with your other hand to return
it to its original position.
Lower looper thread guides (2) and (3) will return to
their original position automatically.
* You can return the lower looper thread guide (1),
(2) and (3) to their original position automatically
by turning the handwheel counterclockwise.
, and then pass