z21 DUAL BOOSTER Manuel D'utilisation page 40

Z21 Booster
_
Configuring:
The Z21-Boosters can be configured in one of three ways:
1. via CAN with the Z21 Maintenance Tool
2. via POM write commands in booster configuration mode
3. via the STOP button in booster configuration mode
Configuration and firmware update via CAN and Z21 Maintenance Tool
If the Z21-Boosters is connected with the Z21, via CAN, it appears automatically in the Z21 Maintenance
Tool (from V1.14, take the chance and also update the Z21 firmware), possibly under each other in the
"CAN".
40
40
Blue on: Normal mode
Now press the STOP button and hold it:
Blue flashes: STOP (track voltage deactivated)
Green flashes: Configuration mode (1st track output)
White flashes: Configuration mode (2nd track output, dual booster)
Red flashes: Restart of the booster firmware (warm start)
Violet flashes: Reset to factory default settings
INFO: "white" = red + green + blue simultaneously;
"violet" = red + blue simultaneously.