Okay EVL 1700 Mode D'emploi page 59

13. REPAIR SERVICE
Attention! Electrical repairs may only be carried out by a
skilled electrician or a customer service workshop!
If you send the machine to us for repair, please describe
the fault.
14. SPARE PARTS
If you need accessories or spare parts, please contact our
Service department.
When working with this tool, do not use any accessory parts
other than those recommended by our company. Otherwise
the operator or others in the vicinity could suffer serious
injuries, or the tool could be damaged.
The following information should be provided when or-
dering spare parts:
• Type of machine
• Item number of the machine
15. WASTE DISPOSAL AND ENVIRONMENTAL
PROTECTION
Dispose of the machine properly after it is worn out. Dis-
connect the mains cable in order to prevent misuse. Do
not dispose of the machine with the household waste. In
the interest of environmental protection, take it to a col-
lection point for electric machines. Your responsible local
authority can provide you with addresses and operating
times. Also take the packaging materials and worn out
accessories to the appropriate collection points.
Only for EU countries
Do not discard electric tools in the household
waste!
In accordance with European Directive 2012/19/
EC on waste electrical and electronic equipment
and its implementation in national law, waste
electric tools must be collected separately for
environmentally-compatible re-use.
Recycling alternative to the return invitation:
Instead of returning the electric equipment, the owner is
alternatively obligated to take part in the proper recycling
in the case of relinquishment of ownership. The waste
equipment can also be taken to a collection facility which
disposes of it in the sense of the national recycling man-
agement and waste acts. This does not pertain to the ac-
cessory parts and auxiliary equipment without electrical
components accompanying the waste equipment.
16. WARRANTY
For this electric tool, the company provides the end user
- independently from the retailer's obligations resulting
from the purchasing contract - with the following war-
ranties:
The warranty period is 24 months beginning from the
hand-over of the device which has to be proved by
the original purchasing document. For commercial use
and use for rent, the warranty period is reduced to 12
GB | Operating Instructions
months. Wearing parts and defects caused by the use
of not fitting accessories, repair with parts that are no
original parts of the manufacturer, use of force, strokes,
rechargeable batteries and breaking as well as mischie-
vous overloading of the motor are excluded from this
warranty. Warranty replacement does only include defec-
tive parts, not complete devices. Warranty repair shall
exclusively be carried out by authorized service partners
or by the company's customer service. In the case of any
intervention of not authorized personnel, the warranty
will be held void.
All postage or delivery costs as well as any other subse-
quent expenses will be borne by the customer.
17. EC DECLARATION OF CONFORMITY
We, ikra GmbH, Schlesier Straße 36, D-64839 Mün-
ster - Germany, declare under our sole responsibility
that the product Electric Lawn Scarifier & Raker EVL
1700, to which this declaration relates correspond to
the relevant basic safety and health requirements of
Directives 2006/42/EC (Machinery Directive), 2014/30/
EU (EMC-Guideline), 2011/65/EU (RoHS-Guideline) and
2000/14/EC+2005/88/EC (noise directive) incl. modifica-
tions. For the relevant implementation of the safety and
health requirements mentioned in the Directives, the fol-
lowing standards and/or technical specification(s) have
been respected:
EN 60335-1:2012+A11:2014; EN 50636-2-92:2014
EN 62233:2008; AfPS GS 2014:01; EN 50581:2012
EN 55014-1:2006+A1+A2; EN 55014-2:1997+A1+A2
EN 61000-3-2:2014; EN 61000-3-3:2013
EK9-BE-35:2004
measured acoustic capacity level
guaranteed acoustic capacity level
Conformity assessment method to annexe V /
Directive 2000/14/EC
The year of manufacture is printed on the nameplate and can be
additionally retrieved via the consecutive serial number.
Münster, 13.09.2017
Matthias Fiedler, Senior Product Manager Ikra GmbH
Maintenance of technical documentation:
Ikra GmbH, Schlesierstrasse 36, 64839 Münster, Germany
GB-12
89,5 dB(A)
94,0 dB(A)