Dogtra PATHFINDER2 Serie Manuel Du Propriétaire page 9

4
POWER /
CONNECT
PHONE
CONNECT
GPS RECEIVER
PAIRING THE RECEIVER TO THE GPS CONNECTOR
1
2
POWER /
CONNECT
PHONE
Connect
CONNECT
GPS RECEIVER GPS
Receiver
Button
3
POWER /
CONNECT
PHONE
CONNECT
GPS RECEIVER
14
Your phone should show a connection
completion screen and the green
LED will blink slowly on your GPS
connector.
Make sure the receiver is turned off.
Press and hold the power button for
more than 3 seconds until the green
LED rapidly flashes and a melody
plays. Release the button.
Make sure the connector is turned
on. Press and hold the Connect GPS
Receiver Button until the green LED
rapidly flashes.
The pairing is complete when the
melody stops and the LED lights stop
rapidly flashing.
4. KEY FEATURES OF PATHFINDER2 APP
4-1. MAP
Create Marker
3
Map Selection
4
Icon Description
My Position
1
The blue dot will show your location on the map. Press the My
Position button on the bottom right corner to recenter your location
on the map.
Dog Position
2
The dog icon shows your dog's current action status. It also provides
Traveled Distance, Current Speed, Altitude, Battery, Updated Time,
and Shared Device.
Create Marker
3
Press the icon to add a marker. You can create markers for 'My
Truck' (car location), Truck, Dog, Tree, Favorite, or Note.
Map Selection
4
Select general, satellite, or terrain map.
Dog Position
2
My Position
1
My Position
1
Main menu tab
15