Dogtra PATHFINDER2 Serie Manuel Du Propriétaire page 7

UNDERSTANDING YOUR TRAINING SYSTEM
1. BUTTON FUNCTION
10
GPS Connector (PT20C)
POWER/CONNECT PHONE BUTTON
• On: Press the button until a green LED
light appears and 3 short beeps emit.
• Off: Press the button until a red LED
light appears and 1 long beep emits.
• Use this button to pair a smartphone.
Find out more on page 13.
CONNECT GPS RECEIVER BUTTON
Use this button to pair a GPS receiver.
Find out more on page 14.
FUNCTION BUTTON
The Function button will emit the
e-collar function selected in the app
when pressed. Find out more on
page 21.
GPS Receiver (PR20C, PM20C)
POWER BUTTON
• On: Press the button until a green LED
light appears and 3 short beeps emit.
• Off: Press the button until a red LED
light appears and 1 long beep emits.
2. LED INDICATOR
GPS Connector (PT20C)
The Power LED blinks every 2 seconds
while turned on. The LED colors
represent the battery life:
Green: 50-100%
Orange: 10-49%
Red: 0-9%
GPS Receiver (PR20C,PM20C)
The LED on the GPS receiver blinks
every 2 seconds while turned on. The
LED colors represent the battery life:
Green: 50-100%
Orange: 10-49%
Red: 0-9%
The LED on the GPS Receiver will show
different color when E-Fence or Locate
Light function is activated.
When the E-Fence mode is on, the LED
will blink in blue in between the battery
life indication blinking.
When the Locate Light is on, the white
LED will blink rapidly every 0.2 seconds
without the battery life indication
blinking.
11