Dogtra PATHFINDER2 Serie Manuel Du Propriétaire page 13

Setting for the GPS Connector's Function Button
Press the 'GPS Connector Function Button Setting' icon on the E-Collar tab to
arrange the stimulation type through the GPS Connector's Function button. This
setting page is ideal when you want to change the stimulation type and level
without commanding the GPS Receiver.
: Function Button Setting
Notes:
The arranged stimulation type and/or level from this page will apply to both
on the app and GPS Connector. You cannot have two different stimulation
types arranged for the PATHFINDER2 app and GPS Connector.
22
4-5. FENCE TAB
The PATHFINDER2 offers three types of fences for you to either receive a
notification of your dog crossing boundaries or to auto-correct your dog.
The types of fences included are:
1. Mobile-Fence: A fence setup that moves based upon your smartphone
location and will send you a notification.
2. Geo-Fence: A static fence setup that will send you a notification.
3. E-Fence: A static fence setup that will send your dog an auto-correction and
send you a notification.
1) Mobile-Fence (Notification Only)
- Mobile-Fence is created with a radius centered around your smartphone
(the blue point on the map).
- Status: Indication of receiver in or out of the fence.
- Count: Number of times the receiver has crossed the fence.
- Set the radius from 10 to 2,000 metres.
- Set the Mobile-Fence Alarm settings by going to MENU
MOBILE-FENCE.
Notes:
• The Mobile-Fence gives a notification on the smartphone, but does not
auto-correct the e-collar.
• The automatic e-collar correction will only work on the E-Fence.
SETTING
23