Dogtra PATHFINDER2 Serie Manuel Du Propriétaire page 12

4-4. E-COLLAR TAB
Nick/Constant
Nick will emit a single rapid pulse of stimulation. Constant will provide
continuous stimulation as long as the but ton is pressed, up to 12 seconds.
Stimulation Level
Set the stimulation from level 1-100 using the slider. Press and hold the button
on the slider to turn the Lock feature on or off.
Pager
Press Pager to emit the Pager as long as the button is pressed, up to 12 seconds.
Tone
Press Tone to emit a sound as long as the button is pressed, up to 12 seconds.
Locate Light
Press the Locate Light button to turn the light on or off.
Disable E-Collars
Pressing the 'Disable E-Collars' button will disable the e-collar function on all
GPS Receivers and Connector to prevent accidental stimulation until
re-activated. Press the same button again to activate the e-collar function. Slide
the top edge of the E-Collar tab window upward to find the Disable E-Collar
button under the stimulation buttons.
: Disable E-Collar Button
20
Sending Commands
1. Select the device from map or list view.
2. Select Nick or Constant and set the stimulation level from 1 to 100, which can
be set for each dog.
3. You can also send commands such as Light, Tone, or Pager.
GPS Connector's Function Button
The last used e-collar command will be color selected in the app. The Function
Button on the GPS connector will operate the last selected command on the last
selected collar. Keep in mind that if the Lock is on in the app, the GPS connector
Function button will be locked too.
Notes:
The E-Collar tab is disabled when the Tracking Only Mode is turned on in the
Settings menu. Dogs are not displayed when hidden or offline.
21