Switching on the appliance
Press the POWER button
When the appliance has been switched on, the appliance
begins to cool down. When the doors are open, the interior
lights come on.
The preset temperatures (factory settings) are reached
after some hours. Do not put any food in the appliance
beforehand.
Do not use the first ice cubes from the ice maker!
Discard the ice production of the first 24 hours after
switching on the ice maker.
To change the preset temperatures
–> see "Setting the temperature".
Switching off and disconnecting
the appliance
Switching off the appliance
Press the POWER button
If switching off the appliance for a period longer than
2 weeks, remove the water filter. Before switching on the
appliance again, install a new filter (see "Exchanging the
filter").
Disconnecting the appliance
If you do not use the appliance for a prolonged period:
Switch off the appliance.
Shut off the water supply line.
Shut off the water supply line several hours before
switching off the appliance.
Remove and discard the water filter.
Secure the filter cap!
O
.
NOTE
NOTE
O
.
NOTE
Take all food out of the appliance.
Pull out the mains plug or switch off the fuse.
Empty the ice cube container.
Clean the appliance interior
(see "Cleaning the appliance").
To prevent odors, leave the doors open.
Variable interior design
You can rearrange the shelves inside the appliance and the
containers in the door as required.
Shelves
The height of the shelves can be adjusted.
Lift the shelf at the front and move it up or down
in the guides.
Lower the shelf to the required position and snap it into
the preset openings in the guide.
11