Switching On The Appliance; Selecting The Temperature; Button Lock; Warning Signal - Gaggenau RW 262 Notice D'utilisation

Switching on the appliance

Press the main switch, 1. The appliance starts refrigerating.
The factory has preset the upper chilling zone with a basic
setting of +18 °C and the lower chilling zone with a basic
setting of +10 °C.

Selecting the temperature

The set values can be changed, see Description of control
panel.

Button lock

The button lock prevents the appliance from being switched
off unintentionally and the temperature from being changed.
24
Switching button lock on and off
Simultaneously press buttons Æ and Ç for 3 seconds to
switch the button lock on.
˜©¥ is displayed.
Simultaneously press buttons Æ and Ç for 3 seconds
again to switch the button lock off.
˜©Ÿ is displayed.

Warning signal

The door warning signal
If the appliance door is open for longer than two minutes,
the door warning signal sounds and š©§ is indicated on the
display panel. Close the door to switch off the warning
signal.
Temperature warning signal
If the temperature drops more than 2 °C below the set
temperature for longer than 60 minutes, Lta/actual
temperature (low temperature alarm) is indicated on the
temperature display and an alarm sounds.
If the temperature rises more than 5 °C above the set
temperature for longer than 60 minutes, Hta/actual
temperature (high temperature alarm) is indicated on the
temperature display and an alarm sounds.
The acoustic and optical signals may be actuated without
risk to the refrigerated food:
90 minutes after the appliance was switched on.
When large quantities of fresh food are placed in the
appliance.
The alarm automatically ends when the set temperature has
been restored in the cabinet.
Press any button to switch off the warning signal.
Note!
Very low temperatures will prevent the wine from maturing.