Energy-Saving Mode; Alarm Function; Switching Off The Warning Signal; Door Alarm - Gaggenau RF 411 Guide D'utilisation Et D'entretien

Energy-saving mode (Eco function)
When the Eco function is activated, the appliance switches
to energy-saving mode. This Eco function required
temperature – set at the factory – is energetically more
favourable. The background light of the display is reduced.
The Eco function is activated in Setup mode.

Switch on Setup mode.

Press the > button until ECO MODE is displayed.

Press the + or – button to change

Press the SETUP button
ECONOMY is displayed.
The Eco function is ended by
– switching off the Eco function in Setup mode.
– activating the Fast freezing function.
– changing the required temperature of the appliance.
– switching off the appliance with the POWER button
16
.
ON/OFF
W
to save the setting.

Alarm function

Switching off the warning signal

Press the alarm button

Door alarm

The door alarm switches on if an appliance door is left open
for longer than three minutes.
Close the door to switch off the warning signal.

Vacation mode

If you are away for a prolonged period, you can switch
the appliance to an energetically more favourable mode.
When Vacation mode is active,
– the appliance switches to energy-saving mode
(see section on "Energy-saving mode (Eco function)"),
– the Fast freezing ends (if switched on),
– the interior light switches off,
– the ice maker switches off.
To switch on Vacation mode:

Press the VACATION button
O
.
The
VACATION
Instead of the required temperature, the presetting
temperature is displayed.
To end Vacation mode, press the VACATION button
The previous settings and temperature values are used
again.
.
to switch off the warning signal.
$
.
symbol is displayed.
$
.