Switching The Appliance On; Operating Tips - Gaggenau RB 280 Notice D'utilisation

Controls
9 8
On/Off button ÿ
1
Serves to switch the whole appliance on and
off.
Fast button freezer section h
2
Switches fast freezing on and off (see chapter
"Fast freezing").
3 Temperature selection buttons freezer
section +/-
These buttons set the temperature in the
freezer section.
4 Temperature display freezer section
The numbers correspond to the set freezer
section temperatures in °F.
Alarm button Ú
5
Used to switch off the warning signal (see
chapter "Alarm function").
Holiday button »
6
Is used to switch holiday mode on and off (see
chapter Holiday mode).
7 Temperature selection buttons refrigerator
section +/-
These buttons set the temperature in the
refrigerator section.
8 Temperature display refrigerator section
The numbers correspond to the set
refrigerator section temperatures in °F.
Fast button refrigerator section Û
9
Switches fast cooling on and off (see chapter
Fast cooling).
°F
7 6
°F
5 4

Switching the appliance on

1. Switch on the appliance with the On/Off button
ÿ .
A warning signal sounds, the temperature display
for the freezer section flashes and the alarm
button Ú is lit.
2. The warning signal is switched off by pressing
the alarm button Ú.
The appliance begins to cool. Light is switched
on when the door is open.
The factory has recommended the following temperatures:
▯
Refrigerator section +39 °F (+4 °C)
▯
Freezer section 0 °F (–18 °C)

Operating tips

▯
After the appliance has been switched on, it may
take several hours until the set temperature has
been reached. Do not put any food in the
appliance beforehand.
▯
The fully automatic No Frost system ensures that
the freezer section remains free of ice. Defrosting
is not required.
▯
The front sides of the housing are sometimes
heated slightly. This prevents condensation in the
area of the door seal.
▯
If the freezer section door cannot be immediately
re-opened after it has been closed, wait until the
resulting low pressure has equalized.
3 2 1
9