Publicité
Les langues disponibles
Les langues disponibles
Check with your connected device manual and see if
your connected device current consumption comply with
this product. The minimal output current of the power
bank is approx. 60 mA.
The power bank
the button is pressed or when a device
is connected, even though the battery is
charged.
The power consumption of the connected devices is too
high. Therefore, the internal overcurrent protection device
was activated.
Reduce the number of devices connected and press the
ON / OFF button
˜ Cleaning and care
This product has no internal parts requiring maintenance.
Moisture entering the product may result in damage.
Ensure no moisture enters the product during cleaning to
*
prevent damaging the product beyond repair.
Do not use abrasive, solvent-based or aggressive
*
cleaners. These can damage the surface of the product.
Only clean the product with a slightly damp cloth and
*
mild washing-up liquid.
˜ Storage during non-use
Store the product in a dry dust-free location, protected
*
from direct sunlight.
does not react when
7 ]
[
.
4 ]
[
GB/IE
43
Publicité
