Parkside PPB 10000 A1 Instructions D'utilisation Et Consignes De Sécurité page 43

m ATTENTION! Do not connect any device to be charged
to power bank as long as the power bank is charging.
Remove the charging cable from the power bank when it
is fully charged.
˜ Checking the battery status
You can check the battery status via the LED indicator
the power bank
Briefly press the ON / OFF button
*
indicator
internal battery capacity level for approx. 30 seconds.
˜ Charging mobile devices with the
power bank
You can charge up to two devices at the same time using the
power bank
7 ] [
sum of the output current may not exceed 3 A.
To charge your USB Power Delivery (PD) enabled
*
device, connect the USB Type C plugs of your USB Type
C to Type C cable to the PD port
bank and the PD port of the device to be charged. The
charging process will start automatically.
When a PD enabled device is charged at a Type C port,
*
the fourth LED of the battery capacity indicator lights
up green. If two Type C are used for charging, the 4th
LED will still be the original colour of the battery status
indicator.
40 GB/IE
at anytime.
7 ] [
shows the approximate charge status of the
8 ] [
. If all outputs are used at the same time, the
. The LED
4 ] [
, of the power
1 ] [ 2 ] [
of
8 ] [