Publicité
Trouble Shooting
See Pages 43 and 44
See Page 44
The machine does not
1.
Threads have been caught in hook mechanism.
run smoothly and is
The feed dog is packed with lint.
noisy.
The needie thread
.
The needle thread is not threaded properly.
See Page 18
breaks.
.
The needle thread tension is too tight.
See Page 20
The needle is bent or blunt.
See Page 13
The needle is incorrectly inserted.
See Page 13
The fabric is not being drawn to the rear when sewing is finished.
See Page 22
The thread is either too heavy or too fine for the needle.
See Page 14
1.
The bobbin thread is not threaded properly in the bobbin holder.
See Page 17
2.
Lint has collected in the bobbin holder.
See Page 43
The bobhin is damaged and doesn't turn smoothly.
Exchange bobbin.
The bobbin thread
breaks.
The needle breaks.
1.
The needle is incorrectly inserted.
See Page 13
2.
The needle is bent or blunt.
See Page 13
3.
The needle clamp screw is loose.
See Page 13
4.
The tension of the needle thread is too tight.
See Page 20
b.
The fabric is not drawn to the rear when sewing is finished.
See Page 22
6.
The needle is too fine for the fabric being sewn.
See Page 14
7.
The pattern selector dial has been turned while the needle was in the material.
See Page 21
Skipped stitches
1.
The needle is incorrectly inserted.
See Page 13
2.
The needle is bent or blunt.
See Page 13
3.
The needie and/or threads are not suitable for the work being sewn,
See Page 14
4.
ABLUE TIPPED needle is not being used for sewing stretch, very fine fabrics and synthetics,
See Page 14
5.
The needle thread is not threaded properly.
See Page 18
6.
The presser foot pressure is not strong enough,
See Page 10
45
Publicité
